Metallized Polypropylene Film Capacitor TYPE-AUP |
Introduction: |
The capacitor are non-inductively wound with a metallized polypropylene fim dielectric/electrode,encapsulated in flame retardant(UL94, V-0) plastic case(PBT) and epoxy resib end seal. |
* Used in fans, air-conditioners, refrigerators,Power Systems (UPS),office equipment, mercury lamps, fluorescent lamps and business machines. |
Leads Type: |
A:Terminals |
S:Tinned copper clad steel wire radial leads. |
W:Soldering terminals. |
P:UL 1015 or UL1007 stranded PVC insulation wire. |
Specifications and dimension: |
* Base Specification: |
(a)IEC 33 (C0)77:Used for AC motor application |
(b)JIS C 4908:Used for electrical apparatus |
(C)CNS 4327:Used for electrical apparatus |
* Climate Category:In accordance with DIN40040 HSF |
(a)H=Minimum Limit Temperature:-25°C |
(b)S=Maximum Limit Temperature:+85°C |
(c)F=Humidity Category:Average relative humidity=<75%,95% for 30 days per year, continuously;85% for the remaining days,occasionally. |
* Rated Voltage:100,180,250, 300, 350, 400, 450 VAC |
* Capacitance Range:0.5μ F ~ 35 μF |
* Capacitance Tolerance:U(- 5%~ +10%), J ( ± 5 % ), K (± 10 % ) |
* Withstand Voltage: |
(a)Between Terminals:R.V. ×√2× 175% for 1 minuite(VDC). |
(b)Between Terminals and Case:2×ated voltage +1,000V(1500V Min) for 60s.This test occasional self-healing breakdown are allowed. |
* Disssipation Factor:0.1% at 200V.AC, 60Hz and 25°C |
* Insulation Resistance: |
(a)Between Terminals:Insulation resistance:more than 1,000 Mohm μF |
(b)Between Terminals and Case:>=10 MΩ Measured at 100V.AC, 60s. And 25°C |
If you have any inquiry, please don't hesitate to contact with Trustbond Technology Crop., |